TD2.9 L04 Speed sensor Cog gear for Deutz 0413 2044

For driveline specialists and parts distributors looking for the tcd2.9 Speed sensor Cog gear 0413 2044, this component serves as the primary mechanical interface that converts rotational axle or transmission shaft speed into electrical pulses for the vehicle's speed monitoring and anti-lock braking logic. The critical performance attribute lies not in the material hardness alone, but in the tooth-edge squareness and pitch uniformity across the full 360° circumference—any deviation exceeding 0.08mm in tooth flank profile will produce irregular air-gap flux variations, leading to intermittent speed signal dropouts that confuse the ECU and trigger false fault codes. Our export-grade rings are produced using fine-blanking process with subsequent 100% optical contour inspection, ensuring that each tooth presents identical inductive surface area to the Hall-effect or variable-reluctance sensor tip. We also pre-validate each production batch against original fitment clearance specifications for common ZF, Eaton, and Allison transmission housings. To support overseas aftermarket channels, we apply rust-preventive oil and shrink-film wrapping over individual cartons, with clear marking of tooth count and outer diameter on each label, enabling quick warehouse identification and smooth customs processing for containerized or express shipments to Europe, Americas, and Southeast Asia.